How to Root Tecno w4 100% working Tested (TWRP)

•  Sp FLash Tool  or miracle box
•  UPDATE-SuperSU-v2.46.zip Download
• TWRP Recovery For Tecno W4 Download
•  installed Vcom Drivers on PC
  

1. Connect your device to your PC

2. Send the  UPDATE-SuperSU-v2.46.zip to your external sdcard

3. Discount and put your Phone off

3. The

Twrp Recovery

you downloaded unzip it on your desktop

4. Launch your Sp Flash Tools

5. load the scatter file from the Sp flash Tools

6. Navigate and select the scatter file in the unzip Twrp folder

7. Tick just recovery in the Sp flash

8. In the select option on Sp flash tools put Download  only

9. Click Download

10. Connect the switched off phone (with battery inside) to the PC via USB cord

12. A progress bar should start running

13.Wait till you get a Success message (green circle with OK), do not interrupt before then

Nice job you have successfully flash recovery on your tecno w4

(1. Nvram backup

2. boot.img backup

3. Recovery.img backup

4. Uboot backup

5. Emmc repair)  (1-5 optional)

6. Recovery.img and boot.img install/flash

1. Boot To recovery mode

(power off your device then Hold power button and Volume Key same for five Sec.)

2. In

Twrp Recovery

Choose install zip from sdcard navigate to the

 UPDATE-SuperSU-v2.46.zip

from sdcard (use volume key to scroll) to install.

3. After Flashing navigate back and reboot.

Note: if you have any boot loop download tecno w4 firmware and falsh and repeat the step (http://xtechmobile.com/tecno-stock-rom-list-view/)

CREDITS TO