How to Flash Stock Rom using Smart Phone Flash Tool

These are the instructions to Flash Stock Rom or any custom rom using Smart Phone Flash Tool (SP Flash Tool) on Windows Computer.

Requirements: Your Android Smartphone should have at-least 40-50 percent of battery to perform the Flashing Process.

Flash Stock Rom using Smart Phone Flash Tool

Step 1: Download and install Android USB Driver on your computer. In case Android USB Drivers are already installed on your Computer then skip this step.

Step 2: Power Off your Android Smartphone and remove the Battery (if it is removable).

Power Off Android Smartphone

Step 3: Download the Stock Rom or Custom Rom that you want to Flash on your Android Smartphone and extract it on your Computer.

Step 4: Download and Extract Smart Phone Flash Tool on Your Computer. After Extracting you will be able to see the following files:

Smart Phone Flash Tool Extracted Files

Step 5: Now Open Flash_tool.exe (you will find this from the extracted files in Step#6).

Open SP Flash Tool

Step 6: Once Smart Phone Flash Tool is launched, Click on the Download Tab.

SP Flash Tool Welcome

Step 7: In the Download Tab, now click on the scatter-loading button.

Smart Phone Flash Tool

Step 8: Now, Locate the Scatter File (you will find the scatter file in the Stock rom folder).

Locate Scatter File in SP Flash Tool

Step 9: Now, Click on the Download Button to begin the Flashing Process.

Begin Stock Rom Flash Process

Step 10: Now, Connect your Smartphone to the Computer using USB Cable (without battery- if it is removable). After connecting the device to the computer Press Volume Down or Volume Up key, so that your computer easily detect your smartphone.

Step 11: Once Flashing is completed, a Green Ring will appear.

Green Ring in Smart Phone Flash Tool

Step 12: Close the Smart Phone Flash Tool on your computer and disconnect your Android Smartphone from the computer.

Congratulations, Now your Android Smartphone is successfully running the Stock Rom you have Downloaded.

Keep in mind:

[*] The above tutorial only works with the Stock firmware or Custom Rom which comes with the Scatter file in it (basically mediatek devices).

[*] Backup Please: Take a backup of your important data before using the Smart Phone Flash Tool as because during the flashing process your personal data will be removed permanently.

[*] How to Flash IMEI: After flashing the firmware on your Mediatek Device, you need to follow How to Flash IMEI using SN Write Tool to fix the IMEI on your device.

Leave Your Comment

Your email address will not be published.*