How to use RockChip Batch Tool

0
464
Updated on December 3, 2016

These are the instructions to Flash Stock Rom on Android Devices using RockChip Batch Tool.

Requirements: Your Android Device should have atleast 20-30 percent of battery to perform the Flashing Process.

Flash stock rom using RockChip Batch Tool

Step 1: Download and install Rockchip Driver Assistant on your computer.

USB Logo

Step 2: Download and extract RockChip Batch Tool on your computer. After Extracting you will be able to see the following files:

RockChip Batch Tool Files

Step 3: Now open RKBatchTool.exe from the extracted files.

RockChip Batch Tool Open

Step 4: Once RKBatchTool.exe is launched, Click on the Box right to the FW Path.

RockChip Batch Tool

Step 5: Once you have succesfully added the firmware, RockChip Tool will load it.

RockChip Batch Tool Firmware Added

Step 6: Now, Turn Off your Smartphone and tablets.

Power Off Android Device

Step 7: Now, Press and Hold Volume UP Key on your smartphone and connect it to the computer using the USB cable.

Step 8: Do not release the Volume UP Key on your smartphone until Icon 1 turns Green in Color.

RockChip Batch Tool Device Added

Step 9: Once your Device is successfully added to the computer, Click on the Restore Button to begin the Flashing process.

RockChip Batch Tool Restore

Step 10: Now, RockChip Batch Tool will Flash the Firmware on your Smartphone or tablets (flashing usually takes 4-6 minutes to complete).

Step 13: Once Flashing is completed successfully then you will be able to see Restore Done Success Message.

RockChip Batch Tool Flash Done

Step 14: Now, close RockChip Batch Tool by clicking on the Exit Button.

RockChip Batch Tool Exit

Step 15: Disconnect your Device from the Computer and Restart it.

Congratulations, you are now expert of flashing firmware using RockChip Tool.

Keep in Mind:

[*] The above tutorial only works with the firmware that comes with the support to RockChip Batch Tool.

[*] Take Backup: Take a Phone backup before using the RockChip Tool as because during the flashing process your personal data will be removed.

[*] Alternative Tool: RockChip Factory Tool is the best alternative to RockChip Batch Tool. It also allows you to flash the stock firmware on any RockChip Device.

[*] Credits: RockChip Batch Tool is created and distributed by Fuzhou RockChip Inc. So Full credits goes to them for sharing the tool for free.

Am Michael Serious (S-LEADER 9JA GEEK) C.E.O OF S-LEADER .IT SOLUTIONS (G.S.M AND COMPUTER GEEK). I BELIEVE NOTING IS IMPOSSIBLE WHEN IT COMES TO INFORMATION AND TECHNOLOGY, NEVER BACK DOWN IS MY IDENTITY(I KNOW AM NOT THE BEST BUT ALWAYS OFFER THE BEST OF ME)
SHARE
Previous articleDownload Spice USB Drivers
Next articleDownload RockChip Batch Tool (all versions)
Am Michael Serious (S-LEADER 9JA GEEK) C.E.O OF S-LEADER .IT SOLUTIONS (G.S.M AND COMPUTER GEEK). I BELIEVE NOTING IS IMPOSSIBLE WHEN IT COMES TO INFORMATION AND TECHNOLOGY, NEVER BACK DOWN IS MY IDENTITY(I KNOW AM NOT THE BEST BUT ALWAYS OFFER THE BEST OF ME)

LEAVE A REPLY

Please enter your comment!
Please enter your name here