Tutorial

How to root the Tecno Camon C9 Pro

 

xtechmobile-root-tecno-c9-pro

The Tecno Camon C9 Pro is pretty similar to the Tecno Camon C9 except it has a 3GB RAM and 32GB ROM. This guide will teach you how to root the Tecno Camon C9 Pro.

How can I root my Tecno Camon C9 Pro?

There are two main steps:

  1. Unlocking the Bootloader of the Tecno Camon C9 Pro
  2. Flashing the Hovatek Philz recovery.img and SuperSU2.76.zip
  • Download Philz for Tecno Camon C9 Pro ported
  • Setup ADB and Fastboot on the PC using the guide
  • Extract and copy the Philz recovery.img into the same folder as the fastboot.exe and adb.exe
  • Unlock the Bootloader of the Tecno Camon C9 Pro using the guide
  • Download SuperSU 2.76.zip
  • Copy SuperSU.zip to the phone’s SD card (Its important you insert an SD card)
  • Connect the phone to the PC via USB cord while switched On and boot it into Fastboot (as instructed in the Bootloader unlock guide)
  • When the phone enters Fastboot, flash the Philz recovery image to the phone by typing the command below then pressing Enter

fastboot flash recovery recovery.img

  • Once recovery is flashed in fastboot, hold the Volume up + Power button and don’t release till the phone reboots. When it does, select Recovery from the list to proceed to recovery mode
  • In Philz recovery, you use the Volume buttons to navigate and Power button to select
  • Select Install Zip
  • Navigate to the location of the SuperSU2.76.zip on the SD Card and select it
  • Wait till flashing is complete
  • If you are prompted to fix root, select No
  • Reboot the phone normally
  • Confirm Root by installing and running Root Checker

credits to hovatek team

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

To Top

Follow us on Facebook!