how To Flash CoolPad With CPB Firmware using YGDP Tool

Updated on July 9, 2016

These are the instructions on how to flash CPB firmware using YGDP Tool on any Android Device.

Requirements: Your Android device should have atleast 20-30 percent of battery to perform the Flashing Process.

How to use YGDP Tool

Step 1Download and install the Android USB Drivers on your Computer. If Android Drivers is already installed on your computer then Skip this Step.

USB Logo

Step 2: Download and install YGDP Tool on your computer.

YGDP Tool Setup

Step 3: Now, Open YGDP Flashing Tool (C:YLXZGJYGDPYGDP_Assembly.exe).

Open YGDP Tool

Step 4: Once YGDP Flashing Tool is launched, you will be able to see the following screen:

YGDP Flashing Tool Launched

Step 5: Now, enter the Password 369 or 9527 and click on Login button.

YGDP Tool Login

Step 6: Once you are able to see the main screen of YGDP Tool, then click on the Config button.

YGDP Tool Launched Final

Step 7: And add the CPB firmware (locate the CPB firmware that you want to flash on your android device):

YGDP Flashing Tool Add Firmware

Step 8: Now, Click on the Apply button.

YGDP Tool Firmware Apply

Step 9: Now, connect your android device to the computer (make sure it is power off and battery installed).

Connect Android Device Computer

Step 10: Now, click on the Start Button to begin the flashing.

YGDP Flashing Tool Start Flashing

Step 11: Once Flashing is completed you will be able to see green Upgrade Successful message.

YGDP Tool Successful

Congratulations, Now your Android Device is successfully running the Stock Rom you have Downloaded.

Keep in Mind:

[*] Take Backup: Take a Phone backup before using the YGDP Flashing Tool as because during the flashing process your personal data will be removed.

[*] Always press volume up key from the device and connect to the computer then start the flashing process.

[*] Compatibility issue: If YGDP Tool doesnt work in Windows 7, Windows 8 or Windows 10, in that situation right click on the YGDP_Assembly.exe > Properties > Run this Program in compatibility mode for Windows XP.

[*] Credits: YGDP tool is created by Coolpad Inc, so full credits goes to them for the tool.

Leave Your Comment

Your email address will not be published.*